Siemens WM14LPH0ES User Manual And Installation Instructions Download

Page: 54 / 72

Cleaning and servicing

18.7 Cleaning the water inlet

filter

Emptying the water inlet hose

In order to clean the filter, first empty
the water inlet hose.

Turn off the tap.

Set the

algodón/algodão

pro-

gramme.

Start the programme and leave it
to run for approx. 70 seconds.

Switch off the appliance.

Disconnect the appliance's mains
plug from the power supply.

Cleaning the filter on the tap

Note:

Please read the information in

the sections on Safety →

Page 4

and

Preventing material damage
→

Page 10

Requirement:

The water inlet hose is

empty.

Remove the water inlet hose from
the tap.

Clean the filter with a small brush.

Connect the water inlet hose and
check for leaks.

Summary of Contents for WM14LPH0ES









































































Search results

Summary of Contents for WM14LPH0ES

Reviews:

Related manuals for WM14LPH0ES

Brands by name

Popular brands

Siemens WM14LPH0ES, User Manual And Installation Instructions

Search results

Summary of Contents for WM14LPH0ES

Reviews:

Related manuals for WM14LPH0ES

Brands by name

Popular brands