manualshive.com logo in svg

Siemens WM12W440IN, Instruction Manual And Installation Instructions

Share
Download
Siemens WM12W440IN Instruction Manual And Installation Instructions Download Page 19

Additional programme settings       

en

19

\

Additional programme 

settings

Additional programme settings 

An overview of all additional settings, 

which can be selected depending on 

the programme, can be found from 

~

 Page 14

.

ecoPerfect 

¦

Energy-optimised washing by reducing 

the temperature while achieving a 

washing result that is consistent with the 

selected programme, without the 

ecoPerfect 

¦

 setting.

speedPerfect 

G

Washing in a shorter time while 

achieving a washing result that is 

consistent with, but uses more energy 

than, the selected programme, without 

the speedPerfect 

G

 setting.

Note:  

Do not exceed the maximum 

load.

Overview of programmes 

~

 Page 14

Easy Iron

Reduces creasing thanks to a special 

spin sequence followed by fluffing and 

reduced spin speed.

Note:  

The washing's residual moisture 

is increased.

Extra Rinse

Additional rinse cycle for particularly 

sensitive skin and/or for areas with very 

soft water.

Summary of Contents for WM12W440IN

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands