Siemens WM12UT61ES, User Manual And Assembly Instructions

Page: 54 / 60

en
Transportation, storage and disposal
54
Emergency release
To remove the laundry in the event of
a power failure, for example, you can
manually release the door.
Releasing the door
Requirement:
"The drain pump is
empty." → Page 41
1.
ATTENTION!
Escaping water may
cause material damage.
▶
Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a The door lock is released.
2.
Insert the maintenance flap and
lock it into place.
3.
Close the maintenance flap.
Transportation, storage and disposal
Transportation, storage
and disposal
Transportation, storage and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
Removing the appliance
1.
Turn off the tap.
2.
→ "Emptying the water inlet hose",
Page 44 .
3.
Switch off the appliance.
4.
Unplug the appliance's mains plug.
5.
Drain the remaining detergent
solution.
→
"Cleaning the drain pump",
Page 41
6.
Detach the hoses.
Inserting the transit bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
1.
Remove the four cover caps.
‒
If necessary, use a screwdriver
to remove the cover caps.
Keep the cover caps.
2.
Insert the four sleeves.
3.
Insert all screws into the four
transit bolts and tighten slightly.