Sensors
en
21
H
Sensors
Sensors
Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
"Faults and what to do about them"
VoltMonitor
The automatic voltage control system
detects unauthorised voltage drops
during the washing process.
Note:
Whenever there is an undervol-
tage, the colon flashes on the Ready in
display on the display panel.
When the supply voltage is stable again,
the programme continues running. The
colon on the Ready in display stops
flashing.
If the interruption causes the pro-
gramme to be extended, the dot on the
display flashes.
The voltage control system is activated
when a program is started.
