background image

Positioning and connecting       

en

27

In addition,

 a hose clamp (24 - 40 mm 

diameter, available from specialist 

dealers) is required to connect the 

water drain hose to a siphon. 

Useful tools

Spirit level for levelling

Wrench with:

– WAF 13 for loosening the 

transport locks, and 

– WAF 17 for aligning the 

appliance feet

Safety instructions

:

Warning

Risk of injury!

The washing machine is very heavy.

Be careful when lifting/transporting 

the washing machine.

When the washing machine is lifted 

by its protruding parts (e.g. the 

washing machine door), the 

components may break off and 

cause injuries.

Do not lift the washing machine by 

protruding parts.

If the hose and mains cables are not 

routed properly, there is a risk of 

tripping and injury.

Lay hoses and cables in such a way 

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the washing machine in 

areas exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water 

supply hose and water drain hose are 

under high water pressure. To prevent 

leaks and water damage, you must 

follow the instructions in this section.

Notes

In addition to the safety information 

listed here, the local water and 

electricity supplier may have special 

requirements.

If in doubt, have the appliance 

connected by a specialist.

Installation surface

Note:  

The washing machine must be 

stable aligned so that it does not move 

around.

The installation surface must be firm 

and level.

Soft floors/floor coverings are not 

suitable.

Installation on a base or a 

wooden joist floor

Caution!

Damage to the appliance

The washing machine may "wander" 

and tip/topple from the base when 

spinning.

The feet of the appliance must be 

secured with holding brackets.

Order no. WMZ 20490, 

WZ 20490 WZ 20510, WZ 20520

Note:  

On wooden joist floors, install the 

washing machine:

In a corner, if possible,

0

Bag:

Installation and operating 

instructions

After-sales service location 

directory*

Warranty*

Cover caps for openings left 

after removing the transport 

locks

Wrench*

8

Water drain hose

@

Elbow for securing the water drain 

hose*

H

Water supply hose on standard/

Aqua-Secure models

*depending on the model

Summary of Contents for WM08K060HK





































Reviews: