en
Home Connect
32
Note:
If the
k
display flashes, this
informs you to run the
O
чи
c
тка
барабана
(Drum Clean)
programme or
any other programme at a washing
temperature of at least 60 °C.
Removing laundry/switching
off the appliance
1.
Open the loading door and remove
the laundry.
2.
Switch off the appliance.
3.
Turn off the tap.
Note:
Not required for AquaStop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
■
Wipe the rubber gasket dry.
■
Leave the loading door and
detergent drawer open so that any
remaining water can evaporate.
■
Always wait until the programme
ends; otherwise the appliance could
still be locked. Then switch the
appliance on and wait for it to
unlock.
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can
be remotely controlled using a mobile
device.
You can use the Home Connect app to
do the following on your appliance from
your mobile device:
■
Set up programs and launch them.
■
Adjust, activate and deactivate
program settings.
■
Query the status of programs.
■
Adjust, activate and deactivate
appliance settings.
■
Switch off the appliance.
Before you can use the Home Connect
functions, you will need to carry out the
following steps:
1.
Install the Home Connect app on
your mobile device.
2.
Register in the Home Connect app.
3.
Connect your appliance to your
home network automatically
or
manually (you only need to do this
the first time).
4.
Connect your appliance to the Home
Connect app.
You can find information about the app
on our Home Connect website
www.home-connect.com
Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
Home Connect services in your country.
You can find information on this at:
www.home-connect.com
