Operating the appliance
en
23
1
Operating the
appliance
Operating the appliance
Note:
Install
and
connect
washing
machine properly.
Before the 1st wash, wash once
without
any washing.
Preparing the washing
machine
Notes
■
Never switch on a damaged
washing machine!
■
Inform customer service!
1.
Connect the mains plug.
2.
Turn on the tap.
3.
Open the door.
4.
Check that the drum is completely
emptied. Empty if necessary.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must deactivate it
before you can set a settings
programme.
Use the programme selector to select
the required programme. Can be
rotated in either direction.
The washing machine is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
■
the programme length,
■
the preset temperature* (*depending
on the model),
■
the preset spin speed and
■
the maximum load.
Change the programme
default settings
You can use the displayed programme
presettings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed. They are not
saved when the appliance is switched
off.
Programme default settings
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
