Positioning and connecting
en
13
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water drain hose to a siphon.
Useful tools
■
Spirit level for aligning
■
Spanner with:
– WAF13 for loosening the
transport braces, and
– WAF17 for aligning the appliance
feet
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine; wear
protective gloves.
■
If the washing machine is lifted by its
protruding parts (e.g. the washing
machine door), the components may
break off and cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Route hoses and cables in such a
way that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
If in doubt, have the appliance
connected by a specialist.
Installation surface
Note:
The washing machine must be
aligned in a stable manner so that it
does not move around.
■
The installation surface must be firm
and level.
■
Soft floors/floor coverings are not
suitable.
H
Bag:
■
Operating and installation
instru supplementary
sheet for the operating and
installation instructions
■
After-sales service location
directory*
■
Warranty*
■
Cover caps for openings after
the transport locks have been
removed
■
Measuring aid* for liquid
detergent
■
Adapter with sealing washer
from 21 mm = ½" to 26.4 mm
= ¾" *
P
Water supply hose on standard
model
*
depending on the model
www.devicemanuals.eu/
