25
Emergency release
To release the door mechanically in the event of a power cut:
turn the programme selector to
Off
and unplug the mains plug from the
socket.
open the base panel and drain out the water –> page
pull the emergency release downwards and open the door at the same time.
Before opening the door, make sure that there is no water or hot detergent
solution in the washer dryer.
Under no circumstances open the door with the emergency release while the
drum is still turning.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and unplug the mains plug from the socket.
– Turn off the tap and call the after-sales service
