en
Childproof lock
36
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡
Rinse Stop is activated.
→
¡
The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1.
Set the
Spin
programme or a
programme for draining the water.
→
2.
Press
Start/Reload
.
13.14 Unloading the laundry
1.
Open the appliance door.
2.
Remove the laundry.
13.15 Switching off the appli-
ance
1.
Turn the programme selector to
Off
.
2.
Wipe the rubber gasket dry and re-
move any foreign objects.
3.
Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
▶
Press and hold the two
3 sec.
buttons for approx. 3 seconds.
a
The display shows
.
a
The controls are locked.
a
The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.
14.2 Deactivating the child-
proof lock
Requirement:
To deactivate the
childproof lock, the appliance must
be switched on.
▶
Press and hold the two
3 sec.
buttons for approx. 3 seconds.
a
goes out in the display.
