Siemens WG44G2MG0 User Manual And Installation Instructions Download

Page: 46 / 52

Transportation, storage and disposal

17.1 Emergency release

Releasing the door

Requirement:

The drain pump is

empty. →

Page 33

ATTENTION!

Escaping water may

cause material damage.

▶

Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.

The door lock is released.

Insert the maintenance flap and
lock it into place.

Close the maintenance flap.

Transportation, storage and disposal

18 Transportation, stor-

age and disposal

Transportation, storage and disposal

You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

18.1 Removing the appliance

Note:

More detailed instructions for

use can be found on www.siemens-
home.bsh-group.com or by scanning
the QR code on the title page of this
user manual.

Turn off the water tap.

Empty the water inlet hose.

Switch off the appliance.

Unplug the appliance's mains plug.

Drain the water.
→

"Cleaning the drain pump",

Page 33

Detach the hoses.

18.2 Inserting the transit

bolts

Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.

Use a screwdriver to remove the 4
cover caps.

Keep the cover caps.

Install the 4 transit bolts. Refer to
the description Removing the
transit bolts for this and proceed in
reverse order.

18.3 Using the appliance

again

▶

For further information, see
→

"Installation and connection",

Page 12

and

→

"Before using for the first time",

Page 19

Summary of Contents for WG44G2MG0





















































Search results

Summary of Contents for WG44G2MG0

Reviews:

Related manuals for WG44G2MG0

Brands by name

Popular brands

Siemens WG44G2MG0, User Manual And Installation Instructions

Search results

Summary of Contents for WG44G2MG0

Reviews:

Related manuals for WG44G2MG0

Brands by name

Popular brands