Transportation, storage and disposal
en
51
18.1 Emergency release
Releasing the door
Requirement:
1.
ATTENTION!
Escaping water may
cause material damage.
▶
Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a
The door lock is released.
2.
Insert the maintenance flap and
lock it into place.
3.
Close the maintenance flap.
19 Transportation, stor-
age and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
19.1 Removing the appliance
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
1.
Turn off the tap.
2.
Empty the water inlet hose.
3.
Switch off the appliance.
4.
Unplug the appliance's mains plug.
5.
Drain the water.
→
6.
Detach the hoses.
7.
Empty the dispensers.
19.2 Inserting the transit
bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
1.
Use a screwdriver to remove the 4
cover caps.
Keep the cover caps.
2.
Install the 4 transit bolts. Refer to
the description
→
for this and proceed in re-
verse order.
19.3 Using the appliance
again
▶
For further information, see
→
"Installation and connection",
and
"Before using for the first time",
.