Appliance settings
en
51
Basic settings
To access the basic settings, touch and
hold the
ç
(Silent)
button for approx. 3
seconds. The control panel show:
You can change the following basic
settings:
■
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the
k
Drum Clean
information signal on/off.
End signal
You can select position
1
and use the
˜
button to adjust the volume of the
end signal, e.g.
‘
-
„
.
Possible setting values:
Button signal
You can select position
2
and use the
˜
button to adjust the volume of the
button signal, e.g.
›
-
„
.
Possible setting values:
Brightness
Possible setting values: 1 - 4
You can select position
3
and use the
˜
button to adjust the brightness of the
Touch-Display, e.g.
’
-
„
.
Possible setting values:
0
off
1
quiet
2
medium
3
loud
4
very loud
0
off
1
quiet
2
medium
3
loud
4
very loud
1
not very bright
2
normal level of
brightness
3
bright
4
very bright
#
#