Siemens WD14U561TR, User Manual And Installation Instructions

Page: 37 / 60

Operating the appliance
en
37
ç
(Silent)
Function designed for noise reduction.
Washing and drying process noise will
be reduced, and ending signal will be
switched off.
Note:
If silent is selected for wash only,
remaining moisture of the laundry will
be slightly increased. The spin result
may not be satisfying. Before hanging
you can select
S ı kma (Spin)
programme to further reduce moisture.
1
Operating the
appliance
Operating the appliance
Preparing the appliance
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Tambur bak ı m (Drum Clean)
programme.
~
"Before washing for the first time"
on page 20
Notes
■
Never switch on a damaged
appliance!
■
Inform customer service!
1.
Insert mains plug.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2.
Turn the water tap on.
3.
Open the appliance door.
Switching on the appliance/
selecting a programme
Press the
#
button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The
Pamuklular (Cottons)
programme
(only washing), which is preset at the
factory, is then always displayed.
You can use this programme or select a
different programme.
Note:
If you have activated the
childproof lock, you have to deactivate it
before you can set a
programme.
~
"Childproof lock"
on page 40
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.