Siemens WD14H490AU, Instruction Manual And Installation Instructions

Page: 25 / 44

Changing programme default settings
en
25
Dry
8
: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
drying or timed drying with a required
drying duration is available.
Notes
■
Programme selection in
Intensive
Dry
or
Gentle Dry
position to select
an individual drying programme.
Overview of programmes
~
Page 20
The standard drying mode is
Aut1
.
In this mode the drying time is
automatically set according to the
amount of laundry to be dried. The
result is cupboard-dry laundry.
Drying mode can be set to
Aut2
in
order to obtain an extra dry result; or
preselect the drying time which can
be specified by selecting the
Dry
button.
Cupboard dry
(
Aut1
): For single-
layer fabrics. Garments can be
folded or hung up in a cupboard.
Extra dry
(
Aut2
):For fabrics made of
thick, multilayered items of clothing,
which need to be dried longer.
Garments can be folded or hung up
in a cupboard. Laundry more dry
than Cupboard dry.
■
Programme selection in washing
programmes and if washing and
drying is required without
interruption (only for
Rapid 15’
,
Cottons
,
Easy Care
,
Mix
,
Shirt/Blouse
and :
1.
Touch button
Dry
and activate the
function
Aut1
or
Aut2
.
2.
Do not exceed the maximum loads
for drying.
Overview of programmes
~
Page 20
3.
Maximum spin speed for the
washing programme will be selected
automatically to obtain a good
drying result.
Start delay
@
:Define the Finish in time (end
of programme).
Note:
The respective programme
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration needs to be
changed, e.g. due to changes in the
programme default settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h
.
When the programme has started,
the preselected time is displayed e.g.
8h
and counts down until
the programme starts. Then the
programme duration is displayed,
e.g.
2:30
.
When the programme has started,
the preselected time can be changed
as follows:
1.
Touch the
Start/Reload
button.
2.
Touch the
Start delay
button
and change the Finish in time.
3.
Touch the
Start/Reload
button.