Siemens VersiCharge Operating Instructions Manual Download Page 7

Page: 7 / 73

Introduction

1.3 Open-source software

VersiCharge AC Wallbox IEC

Operating Instructions, 03/2021, A5E50366109-AA

1.3

Open-source software

Open-source software is used in the firmware of the product described. The open-source

software is provided free of charge. We are liable for the product described, including the

open-source software contained in it, pursuant to the conditions applicable to the product.

Siemens accepts no liability for the use of the open-source software over and above the

intended program sequence, or for any faults caused by modifications to the software.
For legal reasons, we are obliged to publish the license terms and copyright notices in the

original text. Please also read the information that is supplied with the product or made

available for download on the Siemens homepage (

https://siemens.com/versicharge

Summary of Contents for VersiCharge










































































Search results

Summary of Contents for VersiCharge

Reviews:

Related manuals for VersiCharge

Brands by name

Popular brands

Siemens VersiCharge, Operating Instructions Manual

Search results

Summary of Contents for VersiCharge

Reviews:

Related manuals for VersiCharge

Brands by name

Popular brands