Commissioning
5.2 Notes on setting up the communication connection
VersiCharge AC Wallbox IEC
40
Operating Instructions, 03/2021, A5E50366109-AA
5.2.2
SIM card
All 8EM131x-xxxxx-3xxx parent devices are designed with a micro SIM card slot for
establishing a mobile wireless connection. 8EM131x-xxxxx-3xx1 devices are supplied with a
SIM card. This must be supplemented by the customer if required. Observe the provider's
specifications for establishing a data connection. The 8EM131x-xxxxx-3xx2 parent devices
are delivered equipped with a factory-fitted SIM card for the connection to the Siemens
Device Management system (and also to the Siemens OCPP backend if necessary). Note that
the data connection can incur costs.
Requirement
When working on the SIM card, follow the instructions below:
1.
Disconnect the charging station from the mains
2.
Secure it against being switched on again
3.
Open the charging station
4.
Check the activation
5.
Put on ESD clothing and use an ESD grounding wrist strap connected to the protective
conductor
Configuring a mobile wireless connection
When using SIM cards from third-party providers, follow these instructions:
1.
You can use a micro or nano SIM card with an adapter. Make sure that the PIN request is
disabled.
To set up a third-party SIM card, you need the following information from the provider:
•
Dial-up number (modem dial string)
•
APN
•
If applicable, Password and user name
Summary of Contents for VersiCharge
Page 1: ......
