Mounting / Installing / Connecting
4.6 Connecting the supply cable
VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA
31
To connect the supply cable, proceed as follows:
1.
Insert the supply cable through the cable entry and connect the supply cable.
Note
Wire end sleeves with flexible cables
When connecting flexible cables, use wire end sleeves.
①
Cable entry
②
Ferrite core
③
Supply line at the terminal block
Figure 4-4
Infeed of VersiCharge Wallbox 8EM1310-..0.-….
a.
Tighten the nuts of the cable gland by hand to ensure a tight seal and strain relief. Use the
supplied reducer for cables with 9-15 mm outer diameter. Check that the seal is sitting correctly.
Figure 4-5
Infeed of VersiCharge Wallbox 8EM1310-..0.-….
Summary of Contents for VersiCharge
Page 1: ......
