Siemens VersiCharge Operating Instructions Manual Download Page 17

Page: 17 / 73

Safety information

2.7 Safety-relevant symbols

VersiCharge AC Wallbox IEC

Operating Instructions, 03/2021, A5E50366109-AA

2.7

Safety-relevant symbols

Symbols for VersiCharge

The following table explains icons than may be located on your product, on its packaging, or

in the accompanying documentation.

Symbol

Meaning

General warning sign

Caution/Notice

You must read the product documentation. The product documentation contains information about

the type of potential hazard and helps to recognize risks and implement countermeasures.

SO 7000 No. 0434B, DIN ISO 7000 No. 0434B

Read the information provided in the product documentation.

ISO 7010 M002

Ensure the device is only installed by an electrically skilled person.

IEC 60417 No. 6182

Adhere to the values for the mechanical load of the device.

Note that connected mains lines must be designed according to the expected minimum and maxi-

mum ambient temperature.

Note that the device must be installed and connected in accordance with EMC regulations.

When the device is connected to the mains, it must not be installed, dismantled, plugged in, or

unplugged.

Note that a device may be exposed to electrical voltages which can be dangerous.

ANSI Z535.2

Do not dispose of the old device with household waste. Follow local, national, and international

regulations for disposal.

Summary of Contents for VersiCharge










































































Search results

Summary of Contents for VersiCharge

Reviews:

Related manuals for VersiCharge

Brands by name

Popular brands

Siemens VersiCharge, Operating Instructions Manual

Search results

Summary of Contents for VersiCharge

Reviews:

Related manuals for VersiCharge

Brands by name

Popular brands