Unit settings
38
Setting date and time
The date and time is set using:
•
\($5
- year number (e. g. "3" for the year 2003)
•
P2QW+
- month (e. g. "6" for June)
•
G$<
- day (e. g. "15" for the 15th of the month)
•
+28U
- hours (e. g."13" for 1 o’clock in the afternoon)
•
0LQ8W
- minutes (e. g."28" for 28 minutes).
3 You can set the required alarm value for engine speed:
–
either by entering the value at
&RQ6WU30$
>
&RQ6W
.
Values are entered in the same way as PIN numbers (-> 24).
–
or by starting off directly with
&$/U30$
>
&$/
.
Let the engine run at idle. The r.p.m. alarm value is automatically set to 2.5
times the idle speed.
4 Confirm the value using the
key.
5 After you have completed all entries, press the
key until you return to the
normal display mode.