manualshive.com logo in svg

Siemens VDO DTCO 1381, Technical Description

Share
Download
Siemens VDO DTCO 1381 Technical Description Download Page 203

Service only

Regularly inspection

11.1 General instructions

Edition 07/2007

Technical Description DTCO 1381

11 - 3

TD00.1381.00 13

2 102

11.1 General instructions

11.1.1 Personnel prerequisites

In the following instructions, the manufacturer assumes that the 
personnel possess extensive professional knowledge, securely 
master the necessary technical activities, and have been trained in 
the use of the DTCO 1381 components as appropriate for the area of 
application.

Installation

The persons who are charged with the installation of the DTCO 1381 
components must complete a training program on the installation 
of the DTCO 1381 components.

Activation and calibration

The persons who are charged with the activation and calibration of 
the DTCO 1381 components must:

•

have  a  valid  workshop  card.

•

complete a training program on the installation, calibration, and 
activation of the DTCO 1381 components.

•

(in Germany) also fulfil the conditions for executing tasks 
according to §57b.

11.1.2 Technical prerequisites

The following requirements must be fulfilled in order to carry out 
the assigned tasks:

•

The equipment and tools required or recommended by the man-
ufacturer must be available.

•

The equipment, testing devices, and furnishings must comply 
with the respective valid legal requirements for the country in 
which they are used.

When installing the DTCO 1381 please obey the valid legal regula-
tions in your country!

Summary of Contents for VDO DTCO 1381















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands