Siemens TQ5 Series, User Manual

Page: 38 / 260

en Transportation, storage and disposal
38
Transportation, storage
and disposal
You can find out here how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.
Activate frost protection
Protect your appliance from frost dur-
ing transport and storage.
ATTENTION!
Residues of liquid in the appliance may
damage it during transport or storage.
▶
Empty the pipe system before trans-
port or storage.
Requirements
¡
The appliance is ready to use.
¡
The water tank has been filled.
1.
Remove the milk container.
2.
Clean the brewing unit.
→ "Cleaning brewing unit", Page 28
3.
Place a large container under the
outlet system.
4.
Press repeatedly until the display
shows "Milk froth".
5.
Press repeatedly until the display
shows 240 ml.
6.
Press ⁠.
7.
Wait until steam escapes from the
appliance.
8.
Remove the water tank.
a
The appliance drains itself automat-
ically.
9.
If the message "Please refill water
tank" appears, ignore it.
10.
Empty and clean the water tank and
drip tray.
11.
Insert the water tank and drip tray.
12.
Switch the appliance off and discon-
nect it from the power supply.
Disposing of old appliance
Valuable raw materials can be re-
claimed by recycling.
1.
Unplug the appliance from the
mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an envir-
onmentally friendly manner.
This appliance is labelled in ac-
cordance with European Directive
2012/19/EU concerning used
electrical and electronic appli-
ances (waste electrical and elec-
tronic equipment - WEEE).
The guideline determines the
framework for the return and re-
cycling of used appliances as ap-
plicable throughout the EU.
Customer Service
If you have any queries, are unable to
rectify faults on the appliance yourself
or if your appliance needs to be re-
paired, contact Customer Service.
You can solve many problems yourself
by consulting the information on
troubleshooting in these instructions or
on our website. If this is not the case,
contact our Customer Service.
We always find an appropriate solution.
With any warranty claims we will make
sure that your appliance is repaired by
trained Customer Service technicians
using genuine spare parts, including
after the manufacturer's warranty has
expired.
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from
Customer Service for a period of at
least 7 years from the date on which
your appliance was placed on the mar-
ket within the European Economic
Area.