8 0 6 8 8 1 A 0 2
s
Nut Keeper Plate
Placa terminal para fijación de conexiones
Connection par vis
1 / 4
Installation Instructions / Instructivo de Instalación
1/4”
6 mm
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
For Use With Frame MG, NG, PG
Para Usar Con Caja Base MG, NG, PG
MG Frame [ Caja Base ]
4 Pole [ Polos ] = 2X - TNKM4 3VL9600-4TB41
3 Pole [ Polos ] = 2X - TNKM3 3VL9600-4TB31
5/16 x 18 x 1.5
TNKM – 1X 3VL9600-4TB01
TNKM3 – 3X 3VL9600-4TB31
TNKM4 – 4X 3VL9600-4TB41
M8 x 1.25 x 40mm
TMKM – 1X 3VL9600-4TA01
TMKM3 – 3X 3VL9600-4TA03
TMKM4 – 4X 3VL9600-4TA04
MG Frame [ Caja Base ]
4 Pole [ Polos ] = 2X - TMKM4 3VL9600-4TA41
3 Pole [ Polos ] = 2X - TMKM3 3VL9600-4TA31
I.L. No. 806881A02
Item: TNKM _
3VL9600-4TB _ 1
TMKM _ 3VL9600-4TA _ 1
TNKP _
3VL9800-4TB _ 1
TMKP _ 3VL9800-4TA _ 1
U.S. Cat. No.
Euro Order No.
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc.
The remaining trademarks in this publication may
be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
