Siemens TI90...HC Series, Instruction Manual

Page: 69 / 164

Home Connect
en
69
Additional settings
Home Connect can be adapted to your
individual needs at any time. Note: The
fully automatic coffee machine must be
connected to the WLAN network.
Disconnecting
The fully automatic coffee machine can
be disconnected from the WLAN
network at any time.
Note:
If the fully automatic coffee
machine is disconnected from the
WLAN network, it cannot be operated
using Home Connect.
1.
Press and hold the
$
/
±
button for at
least 5 seconds to open "Menu".
2.
Use the rotary selector to select
"Home Connect" on the display.
3.
Press the right-hand navigation
button under "select".
4.
Use the rotary selector to select
"Disconn. from network".
5.
Press the right-hand navigation
button under "select". The
connection to the network and app
is disconnected.
6.
Press the
$
/
±
button to close the
menu.
Note:
Information about the WLAN
network is cleared.
Connect to the app
The Home Connect app can be
installed on any number of mobile
devices, which can then be used to
connect to the fully automatic coffee
machine. The fully automatic coffee
machine must already be connected to
the WLAN network.
1.
Open the app on the mobile device.
2.
Press and hold the
$
/
±
button for at
least 5 seconds to open "Menu".
3.
Use the rotary selector to select
"Home Connect" on the display.
4.
Press the right-hand navigation
button under "select".
5.
Use the rotary selector to select
"Connect to app".
6.
Press the right-hand navigation
button under "select" to connect the
appliance to the app.
7.
Press the
$
/
±
button to close the
menu.
Remote Start
If you wish e.g. to start drinks
dispensing on the fully automatic coffee
machine via a mobile device, Remote
start must be activated.
Caution!
Risk of scalding!
If an unattended remote start takes
place, third parties might be scalded if
they reach under the coffee dispenser
during drinks dispensing. You should
therefore make sure that with an
unattended remote start there is no risk
to other people, in particular not to
children, or to property.
Note:
The "Turn on remote start " text
field is is only visible if connection with
Home Connect has been successfully
completed. If Remote start is switched
off, only the modes of the fully
automatic coffee machine are displayed
in the Home Connect app.
1.
Press and hold the
$
/
±
button for at
least 5 seconds to open "Menu".
2.
Use the rotary selector to select
"Home Connect" on the display.
3.
Press the right-hand navigation
button under "select".
4.
Use the rotary selector to select
"Turn on remote start" in the display.
5.
Press the right-hand navigation
button under "select".
6.
Press the
$
/
±
button to close the
menu.