Siemens TI90...HC Series, Instruction Manual

Page: 58 / 164

en
Operating the appliance
58
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
also be switched off.
~
"Menu
settings" on page 63
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
1.
Press the
"
button.
2.
Use the rotary selector to set the
coffee strength or select ground
coffee.
3.
Press the
"
button or the rotary
selector to confirm.
Button Function Selection
"
Selecting the coffee
strength, ground coffee
■
very mild*
■
mild
■
mild +*
■
normal
■
*
■
strong
■
*
■
very strong
■
very *
■
extra strong
■
aromaDoubleShot
strong
■
aromaDoubleShot
■
aromaDoubleShot
+*
■
Ground coffee
milk Milk/coffee mixing ratio Setting share of milk in %
(only for coffee drinks with milk)
ml Cup size Adjustment of the volume in ml increments.
Not available for ristretto.
#
Two cups at once Place two cups under the outlet.
Navigation
button, left
Water temperature* e.g. for tea drinks:
■
> 70°C (white tea)
■
> 80°C (green tea)
■
> 85°C (rooibos tea)
■
> 90°C (black tea)
■
> 97°C (fruit tea)
Navigation
button, right
aromaIntense*
■
normal
■
intense
■
i
* Only available in "barista mode"