Siemens TI 303, Instruction Manual

Page: 47 / 104

Service programmes
en
47
Starting Calc’nClean
Calc’nCle an servic e programm e
Duration: approx. 40 minutes
1.
Press and hold the
calc’nClean
button for approx. 5 seconds.
(
symbol lights up.
2.
Open the door, remove the drip tray
and coffee grounds container and
empty.
3.
Remove and clean the brewing unit.
4.
Place a Siemens cleaning tablet in
the brewing unit and re-insert the
unit.
5.
Re-insert the drip tray and coffee
grounds container and close the
door.
)
symbol lights up.
6.
Pour 0.5 litres of lukewarm water
into the empty water tank up to the
mark and dissolve a Siemens
descaling tablet in it.
7.
Re-insert the water tank and place a
large container (approx. 1 litre)
under the outlet system.
8.
calc’nClean
flashes, touch
calc’nClean
.
The programme starts, cleans and
descales the appliance.
calc’nClean
pulses. Duration approx. 20 minutes.
(
symbol lights up.
9.
Empty the container, open the door,
empty the drip tray and re-insert.
10.
Close the door and place a
container under the outlet system.
)
symbol lights up.
11.
Clean the water tank and fill with
fresh, still water up to the "max"
mark. Place the container under the
outlet system again.
12. calc’nClean
flashes, touch
calc’nClean
.
The programme starts and then cleans
and rinses the appliance.
calc’nClean
pulses. Duration approx. 20 minutes.
(
symbol lights up.
13.
Empty, clean and re-insert the drip
tray and coffee grounds container.
The programme has finished. The
appliance is ready for use again.