Siemens TI 303, Instruction Manual

Page: 42 / 104

en
Settings
42
The table shows the allocation of the
levels to the different degrees of water
hardness:
Subsequent changes to the water
hardness can be made at any time.
Note:
When using the water filter (see
section "Accessories"), proceed as
follows
~
"Water filter" on page 39 .
Factory reset
If you set the appliance back to the
factory settings, you will lose your own
settings.
1.
Press and hold
%
and
calc’nClean
for at least 3 seconds.
2.
Touch the “
V
” button
cappuccino
repeatedly until "Factory reset"
appears.
3.
Confirm by pressing the “ok” button
latte macchiato
.
The setting is saved.
4.
Touch the “
¾
” button
caffe crema
to
exit the menu.
Level Degree of water hardness
German (°dH)
French (°fH)
1 1-7 1-13
2 8-14 14-25
3 15-21 26-38
4 22-30 39-54