221/238
Building Technologies
Modular Heating Controller RMH760B
CE1P3133en
HVAC Products
16 Appendix
05.02.2007
16 Appendix
16.1 Configuration diagrams
The use of the configuration diagrams is explained in subsection 3.2.4.
16.1.1 Terminal
markings
The designations of the signal inputs and outputs and of the assigned connection
terminals are structured as follows:
Example Explanation
N.X3
N = controller RMH760B
X3 = universal input
A9(2).Y1
A9 = type of extension module
(2) = 2nd extension module of same type
Y1 = analog output DC 0…10 V
N.Q5
N = controller RMH760B
Q5 = relay output
16.1.2 Code letters
Physical inputs and outputs are identified by
uppercase
code letters:
Code letter
Explanation
N
Heating controller RMH760B
A2
Heating circuit module RMZ782B
A3
DHW module RMZ783B
A7
Universal module RMZ787
A9
Universal module RMZ789
X Universal
input
Q…
Switching load (changeover or NO contact)
Y
Analog output DC 0…10 V
3P
3-position output, pairs
Internal signals are identified by
lowercase
code letters:
Code letter Explanation
x
Analog or digital
a Analog
d Digital
i Pulse
16.1.3 Configuration choices
Available are a maximum of 4 extension modules, 6 single or twin pumps, and 6 posi-
tioning outputs. Configuration is always made as follows:
•
From arrow to line
•
From uppercase to uppercase letter
•
From lowercase to lowercase letter
16.1.4 Examples
The following examples show the type of plant of each plant type group (H0, H0-x, H1-
x, H2-x, etc.) that contains all possible plant sections (heating circuits, etc.).
Use
Uppercase letters
Lowercase letters
