![Siemens SXG75 User Manual Download Page 21](http://html.mh-extra.com/html/siemens/sxg75/sxg75_user-manual_375424021.webp)
21
General instructions
right page (21)
of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:11)
© Siemens AG 2003, E:\Auftrag\Siemens\Mob
ilePhones\FCCs\sxg75\FUG\WOLF5_Startup.fm
Template: X75, Version 2.2;VAR La
nguage:
en;
VAR issue date: 050902
General instructions
Standby mode
The phone is in
standby mode
and is
ready for use
when the name of the
service provider appears on the dis-
play.
B
Press and
hold
the On/Off/
End key to return to
standby mode from any
situation.
The following information might be
displayed:
Logo
If logo or wallpaper is enabled
CB messages
If CB display is enabled (page 77) a
CB ticker with the latest CB message
is displayed, scrolling horizontally if
needed. The CB ticker is only availa-
ble if the alert region is not used, i.e.
there are no current events.
Alert region
In the alert region above the softkeys
the following message types can be
displayed:
• New entries in missed calls list,
voice mail or inbox.
• New content via IrDA/Bluetooth.
• Missed calendar events.
The number of new entries is
displayed (e.g. 1 Missed call).
Signal strength
Z
Strong signal.
[
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
If phone cannot obtain network serv-
ice after 15 minutes the power save
mode is used. The phone only
attempts to acquire service in
intervals.