Settings
132
© Siemens AG 2003, E:\Auftrag\Siemens\Mob
ilePhones\FCCs\sxg75\FUG\WOLF5_Security.fm
left page (132)
of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:12)
Template: X75, Version 2.2;VAR La
nguage:
en;
VAR issue date: 050902
Settings
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
On
/
Off
Activate/deactivate and
confirm with
C
.
Only
b
(PIN2 or phone-code protected)
Dialling options are restricted to the
SIM protected numbers in the con-
tacts. If only area codes are entered,
relevant numbers can be added to
these manually before dialling.
If the SIM card does not support PIN2
input,
all
the contacts can be protect-
ed with the phone code.
On
/
Off
Activate/deactivate and
confirm with
C
.
PIN codes
PIN control, Change PIN, Change PIN2,
Change phonecde
This SIM only
b
(PIN2 or phone-code protected)
The phone can be linked to a SIM
card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a
different
SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
On
/
Off
Activate/deactivate and
confirm with
C
.
Barrings
b
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit net-
work password for network barring.
Your service provider will supply you
with this password. You may need to
register separately for each barring.
Activate/deactivate Barrings
C
Confirm warning
message.
I
Select call type described
below and confirm
with
C
.
Additional information
The keypad can also be directly locked and
unlocked in standby mode. In each case:
#
Press and hold.
