background image

Technical specifications

 en

63

least 10 years from the date on
which your appliance was placed on
the market within the European Eco-
nomic Area.

Note: 

Under the terms of the manu-

facturer's warranty the use of Cus-
tomer Service is free of charge.
Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of
your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.

Product number (E-Nr.), pro-
duction number (FD) and con-
secutive numbering (Z-Nr.)

You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.

AQUA-STOP guarantee

In addition to warranty claims against
the seller under the purchase agree-
ment and in addition to our manufac-
turer's warranty, we offer compensa-
tion under the following conditions.

¡

If our Aqua-Stop system is defect-
ive and causes water damage, we
will make good the damage for
private users. To ensure protection

from water damage, the appliance
must be connected to the power
supply.

¡

The liability guarantee is valid for
the service life of the appliance.

¡

A claim can only be made under
the guarantee if the appliance has
been correctly installed and con-
nected with Aqua-Stop according
to our instructions; this also in-
cludes correctly fitting the Aqua-
Stop extension (genuine access-
ory). Our guarantee does not cover
defective supply lines or fittings up
to the Aqua-Stop connection on
the tap.

¡

If your appliance is fitted with
Aqua-Stop, you can in principle
leave your appliance unattended
during operation and the tap
turned on afterwards. The tap only
needs to be turned off if you are
away from home for a long period,
e.g. on holiday for several weeks.

Technical specifications

Technical specifications

Technical specifications

Weight

Max.: 60 kg

Voltage

220 - 240 V, 50 Hz or
60 Hz

Power rating

2000 - 2400 W

Fuse

10 - 16 A

Water pressure

¡

Min. 0.05 MPa
(0.5 bar)

¡

Max. 1 MPa
(10 bar)

Inlet rate

Min. 10 l/min

Water temperature

Cold water.
Hot water max.: 60 °C

Capacity

14 place settings

Summary of Contents for SX97T800CE





































































Reviews: