38
Basic Setup Wizard
Gigaset SX763 WLAN dsl / en AnnA / A31008-M707-R131-1-7619 / configure_router.fm / 20.07.2006
Sc
hablone 2
005_0
7_2
7
ì
Select your
Service provider
. The selection menu will contain various possible pro-
viders depending on which country you have chosen. If your provider is not listed,
please use the
Other
option.
ì
Enter the data you have been given by your service provider:
Protocol
,
User name
and
Password
.
ì
The
IP address type
is set automatically.
Leave the default settings for the parameters
MTU
,
Line mode
,
Encapsulation
,
QoS class
and
VPI / VCI
,
unless your service provider has provided you with other
data.
ì
Specify how Internet sessions are to be established via
Connection mode
:
– Select
Always on
if the connection is to exist at all times when the Gigaset SX763
WLAN dsl is turned on.
– Select
Connect on demand
if applications such as an Internet browser or an e-
mail program are to connect to the Internet automatically.
– In the
Idle time before disconnect
field, enter a period after which the Internet
connection is to end automatically if no data is transmitted (the default setting is
3 minutes).
You can deactivate this function by entering "0". This means that the connection
will continue to exist even if no data is transmitted. If you are on a time-based
tariff, this can result in high charges. In this case you should enter a value other
than "0".
This time setting only applies to the
Connect on request
option.
– Select
Connect manually
if you always want to establish and end the Internet
connection manually. If you are on a time-based tariff this will save you high con-
nection charges.
Note:
Connection to the Internet is only possible if you have entered all the data for your
Internet provider correctly.
Notes:
u
This option can result in high connection charges if you are on a time-based
tariff.
u
You must set up the
Always on
option if you wish to use Internet telephony.