Siemens SX75ZX48CE, User Manual

Page: 26 / 64

en
Before using for the first time
26
2.
Pull the tab on the glassZone up
and forwards ⁠.
3.
Set the slider to ON.
4.
Clean under running water.
5.
Place the glassZone in the top
basket and lock in position ⁠.
Check that the mounts are in the
correct position.
a
The glassZone audibly clicks into
position ⁠.
6.
Push in the top basket.
Basket heights
Set the baskets at the right height.
Appliance height 86.5 cm with cutlery drawer
Setting Top basket Bottom basket
1 max. ø 18 cm 34 cm
2 max. ø 20.5 cm 30.5 cm
3 max. ø 23 cm 28 cm
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→
"Home Connect quick start",
Page 39
Requirement:
"The appliance has
been installed and connected."
→
Page 13
1.
"Add special salt." → Page 28
2.
"Add rinse aid." → Page 29
3.
"Switch on the appliance."
→
Page 35
4.
"Setting the water softening sys-
tem." →
Page 27
5.
"Set the amount of rinse aid to be
dispensed." →
Page 30