Troubleshooting NL
Malfunction
Cause
Troubleshooting
Rinse aid refill
indicator is not lit.
Water softening is
switched off.
▶
Amount of rinse aid in
set.
Display flashes.
Appliance door is not
completely closed.
▶
Close the appliance door.
s
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
Malfunctions
Malfunction
Cause
Troubleshooting
There will remain after the
Sieve system or space below
1.
2.
Clean the "seven"
program water in the
appliance.
the sieve is clogged.
Clean the "drain pump"
Program has not yet
ended.
▶
Wait for the end of the program
or cancel the program with Reset
off.
▶
Device cannot be
switched on or operated.
Device functions
have failed.
1.
Disconnect the appliance
from the mains or switch off
the fuse.
2.
3.
Wait at least 2 minutes.
Connect the device to
the mains.
4.
Switch on the device.
The device does not start.
Fuse of the house
installation is not OK.
▶
Check the fuse of the house
installation.
Power cord is not
connected.
1.
2.
Check that the socket is
working.
Check whether the connecting cable is
properly connected to the mains
socket and to the rear of the
appliance.
Appliance door is not
completely closed.
▶
▶
Close the appliance door.
Program starts
automatically.
The program has not
ended.
51