manualshive.com logo in svg

Siemens SONOLINE G50, Service Manual, Page: 195 / 234

Share
Download
Siemens SONOLINE G50 Service Manual Download Page 195

Siemens 

7482255 Rev 01

Page 1 of 2

October 2002

Appendix B - Installation Report

Appendix B: Installation Report

Consult the Siemens 

Speed Info 001/2001/US

 for information on completing 

the 

Ultrasound System Installation Report

 (7295749) shown in Figure B-1.

Access Speed Infos on the intranet at: http://www-td.med.siemens.de:88/. 
From this intranet page, select the following menu items to view 

SI 001/2001/

US

:

Product Information

 

→ 

US Systems

 

→ 

Speed Infos US

 

→ 

2001

 

→ 

001/2001/US

During the installation, perform the 

Field Electrical Safety Test Procedure

 (p/n 

7482776) using the 

G50 and

 

G60 S Electrical Safety Test Limits

 (p/n 

7482784); record the results of the safety test in the 

Field Electrical Safety Test 

Report

 (p/n 7482768).

After completion of the electrical safety test and the test report, provide the 
customer and the regional office with a copy of the report; retain a copy of the 
report for your personal records.

Note:

 The Ultrasound System Installation Report presented in Figure B-1 

includes instructions for its completion and submission. Submit the report within 
5 working days after completing the installation activity.

Summary of Contents for SONOLINE G50











































































































































































































































Reviews:

No comments