Siemens SOMATOM Spirit Operator'S Manual Download Page 97

Page: 97 / 484

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-13

0.0

A.4

Measurements

A.4

On the

task card, you have tools for region evaluation, mea-

suring distances, lengths, and angles, and for pixel evaluation.

A.4

CAUTION

A.4

Measurements in projected images!

A.4

Possible wrong diagnosis.

A.4

✧

Do not use measurements in projected images for diagnos-
tics purposes.

A.4

CAUTION

A.4

The evaluation of distances, angles and ROIs in 3D (VRT or SSD)
and projection (plain-film X-ray or fluoroscopic) images can be
inaccurate!

A.4

Wrong measurement results and wrong diagnosis.

A.4

✧

Do not use uncalibrated projection images to make critical
measurements.

✧

Do not assume that the image calibration is correct.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 97 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: