Siemens SOMATOM Spirit Operator'S Manual Download Page 96

Page: 96 / 484

0.0

Software Related Safety Information

Safety

A.4-12

SOMATOM Spirit

0.0

Viewing

A.4

MIP and SSD images

A.4

Images generated on the

task card can be transferred to the

Viewing

task card for 2D evaluation.

A.4

CAUTION

A.4

Thickness, length, and angular measurements on MIP and SSD
images do not reflect the actual anatomical conditions!

A.4

Basis for incorrect diagnosis.

A.4

✧

Do not perform thickness and length measurements on MIP
and SSD images.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 96 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: