manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 85 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 85

0.0

04/2012

0.0

A.4-1

0.0

CHAPTER

A.3

A.4

Software Related Safety 
Information

This chapter discusses software-related safety information. 

A.4

Patient registration

A.4

Before you can examine a patient with your system, you must 
register him or her.

A.4

Registration means that you give your system all the informa-
tion about a patient that it requires for an examination.

A.4

Unique identification

A.4

Patient name, patient ID, date of birth and sex are used for 
unique identification of a patient in the databases or of 
exported data on devices.

A.4

A.4

A.4

CAUTION

A.4

The internal identification of patient data, for example, studies, 
series and images, uses the system time for generation of the 
patient identification. If it is necessary to turn system time back 
duplicate identified may be created!

A.4

Data may be assigned to wrong patient.

A.4

✧

If it is necessary to turn the system time back for synchroni-
zation, wait until the previous clock setting has been 
passed before creating new patient data.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments