manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 79 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 79

Safety

Mechanical Safety

0.0

04/2012

0.0

A.3-7

0.0

Overheating 

A.3

The possible causes of overheating are:

A.3

❏

Ambient temperature too high

❏

Ventilation openings covered

❏

Defective cooling system

❏

Dirty air filters

i

.3

A

For exchange of the air filters please refer to 

(→

System Owner 

Manual)

A.3

If certain parts of the equipment overheat, a warning is dis-
played on the monitor.

A.3

✧

In this case, finish the current measurement as quickly as 
possible.

Uninterruptible power sup-
ply, UPS  

A.3

The computers of the system are equipped with an uninterrupt-
ible power supply (UPS). Furthermore, the system can be con-
nected to an emergency power supply.

A.3

If the uninterruptible power supply is active, a message or an 
acoustic signal indicates this. 

(→

Page D.1-18 

Exceptional situ-

ations

)

A.3

✧

Finish the current examination as quickly as possible and 
shut down the system.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments