manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 78 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 78

0.0

0.0

Mechanical Safety

Safety

A.3-6

SOMATOM Spirit

0.0

Safety equipment 

A.3

The system contains several items of safety equipment to pro-
tect the patient, the operating personnel, accompanying people 
and the system itself.

A.3

In addition to the measures already mentioned, the system has 
the following safety equipment.

A.3

Temperature monitoring of 
the X-Ray tube assembly 

A.3

The temperature of the X-Ray tube assembly is permanently 
monitored and calculated in advance (this function is running in 
the background). If the temperature rises above the limit value, 
a warning is given.

A.3

If necessary, scanning is interrupted until the required cooling 
period has elapsed.

A.3

i

.3

A

This means that you might have to wait a certain time before 
you can continue with the examination as planned.

A.3

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments