manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 459 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 459

0.0

04/2012

0.0

M-1

0.0

APPENDIX

L.0

M

Glossary

A

M.0

Algorithm

M.0

General computation procedure.

M.0

In this case

: image reconstruction from the measured 

raw data

. 

M.0

Anode

M.0

Positive electrode in the x-ray tube (source of radiation).

M.0

AP

M.0

A

nterior-

P

osterior from front to back.

M.0

API

M.0

A

utomatic 

P

atient 

I

nstruction; breathing instructions to the 

patient.

M.0

Artifact

M.0

Structure in a medical image which does not represent any ana-
tomical structure and which impairs the representation of the 
anatomical structure (e.g., streaks).

M.0

Attenuation

M.0

The ratio of x-ray beam intensity prior to and after passing 
through an attenuating object.

M.0

Attenuation profile

M.0

Local distribution of attenuation values from one direction of 
projection of the fan beam.

M.0

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments