Siemens SOMATOM Spirit Operator'S Manual Download Page 392

Page: 392 / 484

0.0

Constancy Test

Quality Assurance

F.3-8

SOMATOM Spirit

0.0

Performing the lightmarker
test (z-position)

F.3

With the quality measurement, you determine the deviation of
inner light marker from the current slice plane.

F.3

After successful completion of the phantom position check the

Lightmarker

test is started automatically without pressing the

Start

key.

F.3

✓

The set of phantoms is positioned in such a way that the
inner light marker points on the reference marking on the
slice thickness phantom.

(→

✓

The

Lightmarker

test mode is loaded.

✓

You are prompted to press

Start

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Search results

Summary of Contents for SOMATOM Spirit

Reviews:

Siemens SOMATOM Spirit, Operator'S Manual, Page: 392 / 484

Search results

Summary of Contents for SOMATOM Spirit

Reviews: