manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 32 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 32

0.0

0.0

General Safety Information

Safety

A.1-10

SOMATOM Spirit

0.0

Communication

A.1

The patient can communicate with you during the examination 
through the intercom system.

A.1

A.1

Artifacts

A.1

Various influences can cause a distorted image. 

(→

Page A.2-21 

Image Artifacts

)

A.1

✧

If you are not sure, repeat the acquisition, if necessary.

Documentation

A.1

Faults in the computer system can lead to loss of data.

A.1

✧

Document or export the patient images and studies 

as fast 

as possible

.

Computer viruses  

A.1

Despite precautions, the software of the computer system is not 
absolutely safe from computer viruses.

A.1

A.1

CAUTION

A.1

Patient intercom system nonfunctional!

A.1

Patient cannot be understood in case of an emergency.

A.1

✧

Leave the intercom system switched on during the exami-
nation (Listen to patient key).

✧

Keep eye contact with the patient when talking or listening 
to him or her.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments