manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 311 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 311

Operation

Positioning the Patient

0.0

04/2012

0.0

D.4-5

0.0

Patient weight 

D.4

Patients weighing up to 140 kg (300 lbs) can be examined with-
out any restriction.

D.4

Patients weighing up to 200 kg (440 lbs) can be positioned on 
the table and examined. The stability of the patient table is not 
at risk. Yet, the correct functioning of the table (lift, positioning 
precision) cannot be guaranteed 100%.

D.4

✧

Be especially careful when positioning heavy patients on 
the table.

✧

Before you start the examination convince yourself that the 
patient is not endangered either by the movement of the 
table or by the tilt of the gantry.

Problematic patients

D.4

Special caution is required with obese, unconscious, apathetic, 
unresponsive, or pediatric patients.

D.4

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments