manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 308 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 308

0.0

0.0

Positioning the Patient

Operation

D.4-2

SOMATOM Spirit

0.0

Important safety information  

D.4

Safety stop function of the 
patient table

D.4

The patient table is equipped with a safety stop function. The 
patient table stops when a malfunction occurs.

D.4

✧

If the patient table is not movable anymore, stop scanning 
and call Siemens Customer Service.

Positioning accessories

D.4

To avoid danger of injuring the patient during table or gantry 
movements, only positioning accessories approved by Siemens 
should be used. In this way also artifacts can be avoided which 
impair the image quality.

(→

Page D.3-1 

Accessories for Patient 

Positioning

)

D.4

✧

Replace damaged or worn positioning accessories, espe-
cially if mechanical strength is required.

Radiotranslucency

D.4

Positioning aids that are used in the region of interest must be 
made of special radiotranslucent material. They are shaped in 
such a way that they do not cause any image artifacts.

D.4

✧

Nevertheless, use the positioning aids in such a way that 
they do not protrude into the slice plane, if possible.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments