Home
/
Siemens
/
SOMATOM Spirit
/
Operator'S Manual

Siemens SOMATOM Spirit, Operator'S Manual, Page: 284 / 484

Share

Page: 284 / 484

Siemens SOMATOM Spirit Operator'S Manual Download Page 284

0.0

0.0

Accessories for Patient Positioning

Operation

D.3-18

SOMATOM Spirit

0.0

Knee support

D.3

With the knee support, you can position the lower extremities
comfortably and reduce lordosis of the lumbar vertebrae. The
patient is positioned more stable.

D.3

D.3

Safety instructions

D.3

Warning label: Knee support

D.3

D.3

Use of the knee support!

D.3

Increased risk that the gantry might collide with the legs of
the patient.

D.3

✧

Always watch the patient while the table is moving - espe-
cially if the gantry is tilted.

Using the knee support

D.3

✧

Place the knee support under the knees and the lower legs.

«
...
282
283
284
285
286
...
»

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments