manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 236 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 236

0.0

0.0

Switching the System On and Off

Operation

D.1-2

SOMATOM Spirit

0.0

Switching on the system  

D.1

To switch on the system, you have to perform the following 
steps:

D.1

✧

Switch on the main switch provided by the customer for 
gantry and patient table.

D.1

✧

Activate the 

I

 pushbutton at the UPS.

After a short time, the entire system is ready for operation.

D.1

Switching the system on 
again

D.1

If you only wish to switch off the system for a few moments or 
have switched it off accidentally, do not switch it on again 
immediately.

D.1

✧

Wait for approximate 1 minute before switching the system 
on again.

Switching on after a power 
failure

D.1

✓

A power failure has occurred.

✧

Switch the power switch off.

✧

Wait for approximately 1 minute after power recovery.

✧

Switch the system on again.

i

D.1

A warning signal sounds when the UPS has switched to battery 
power during power failure.

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments