manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 235 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 235

0.0

04/2012

0.0

D.1-1

0.0

CHAPTER

D.0

D.1

Switching the System On 
and Off

In this chapter, you will first learn how to start the system: 
switching it on and off, starting the operating system and the 

syngo

 software, checking and calibrating the system.

D.1

You will then be told what you have to pay attention to when 
you shut down the system.

D.1

You will also be told what to do in exceptional situations, like 
overheating or power failure.

D.1

And finally, standby mode is explained to you.

D.1

Switching on

D.1

The acquisition system and the console are switched on and off 
separately.

D.1

❏

The acquisition system is switched on using the power 
switch which is part of the customer´s installation..

❏

The console is started up when you switch on the UPS.

B

D.1

To assure best system performance it is recommended to reboot 
the system once a day. 

(→

Page D.1-16 

Shutdown and restart

)

D.1

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments