manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 225 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 225

System Handling

Use of Storage Media

0.0

04/2012

0.0

C.3-9

0.0

Insertion and removal

C.3

Inserting a USB device

C.3

C.3

C.3

✧

Insert the USB device into the USB port at the front of the 
computer.

The operating system recognizes the USB device.

C.3

C.3

CAUTION

C.3

Using USB devices without own power supply!

C.3

The USB controller can be permanently damaged.

C.3

✧

Use USB devices as recommended by the manufacturer of 
the device.

C.3

CAUTION

C.3

Use of non-integrated USB storage device !

C.3

Reboot request of the operating system.

C.3

✧

Ignore the reboot request and press Cancel.

✧

Finish your examination or application.

✧

Restart the system with System > End > Restart System.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments