manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 203 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 203

0.0

04/2012

0.0

C.2-1

0.0

CHAPTER

C.1

C.2

Operation of the Patient 
Table

Table movements

C.2

During examination, the table movement is controlled from the 
console:

C.2

❏

With the 

Move

 key on the control box, you move the table 

to the position preset on the screen. 

(→

Page B.5-10 

Con-

trol box

)

❏

For sequence examinations, the table is moved in steps 
horizontally.

❏

For spiral scans, the table is moved continuously in horizon-
tal direction.

STOP keys

C.2

C.2

With the 

STOP

 keys, you can interrupt unit movements in an 

emergency (table movements and gantry tilting) and switch off 
radiation.

C.2

If you press one of the red 

STOP

 keys, unit movements are inter-

rupted and radiation is stopped. The functions of the keys for 
system movements are blocked as well. 

(→

Page A.2-14 

Termi-

nating system movements and radiation

)

C.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments